mould release & absorbents
-
Mould Release Agents
After many years of research and development Aerosol Solutions have established one of the most comprehensive ranges of mould release agents to suit even the most difficult requirments
-
CENSOLVE
Solvent degreaser with powerful flushing action
Fast evaporating solvent cleaner, powerful flushing action quickly cleans moulds and tools - leaves no residue. -
-
Silicones
Silicone
A highly effective mould release agent suitable for use in a wide variety of industries.
H.D. Silicone
High quality lubricant formulated for use as heavy
duty mould release agent
(for difficult applications),
textile lubricant etc. -
Non-Silicones
Specialist formulations for use where products are to be subsequently refinished or bonded.
Non Sil
Specifically formulated for use in plastic and rubber industries, will not interfere with finishing operations.
P.T.F.E.
Specialist dry film anti-stick ideal for use where conventional lubricants are liable to dry out or transfer. Recommended for use in engineering, transport, packing, textiles and moulding.
-
M.S.G. - M.S.C.
Mould protection spray. Suitable for tools in storage
Prevents corrosion and incorporates a visual dye to ensure complete coverage. Available in Green (M.S.G.) or Clear (M.S.C.).
A-sorb Absorbents - esay as a, b, c
The cleaner solution to oil and chemical spills
- Fast and easy to use
- Trouble-free disposal
- Hassle-free handling and storage
- Colour coded for easy identification
- Enables compliance with health and safety regulations
- Versatile in use
- Shortens spill down time
- Cost effective in comparison to granules etc
General Purpose
Ideal for all water based liquids and cutting fluid, coolant and hydrocarbons.
Oil only
Specifically designed for maximum absorption of all hydrocarbons including diesel, fuel oil, lubricating oil etc.
Chemical
Will absorb most chemicals including acids quickly and safely.
a) Pads
- Bonded Pads - in Dispenser Box.
- 40cm x 50cm perforated in middle for increased versatility.
- Ideal for soaking up drips, splashes and overspray from machinery pipes, valves, tanks etc.
- Also for leaks and spills at fuel delivery points/dispensing pumps.
b) Socks
- 8cm x 1.2m or 8cm x 3cm. Ideal for spill containment at the foot of machinery or walkway.
- Cleaner than conventional methods and easily removed.
- Excellent for preventing harmful run-off entering drains/watercourses.
c) Rolls
- Standard Weight Bonded Roll in Dispenser Box
- 46m rolls perforated for ease of use.
- Ideal for soaking up drips, splashes and overspray from machinery pipes, valves, tanks etc.
- Also for leaks and spills at fuel delivery points/dispensing pumps.
| a | 1300 | GENERAL PORPOSE PADS (40cm x 50cm) | 100 Pads |
| 1300L | GENERAL PORPOSE PADS (40cm x 50cm) Light | 200 Pads | |
| 1301 | OIL ONLY PADS (40cm x 50cm) | 100 Pads | |
| 1301L | OIL ONLY PADS (40cm x 50cm) Light | 200 Pads | |
| 1302 | CHEMICAL PADS (40cm x 50cm) | 100 Pads | |
| b | 1310 | GENERAL PURPOSE SOCKS (8cm x 3m) | 10 socks |
| 1311 | OIL ONLY SOCKS (8cm x 3m) | 10 socks | |
| 1312 | CHEMICAL SOCKS (8cm x 3m) | 10 socks | |
| 1320 | GENERAL PURPOSE SOCKS (8cm x 1.2m) | 20 socks | |
| 1321 | OIL ONLY SOCKS (8cm x 1.2m) | 20 socks | |
| 1322 | CHEMICAL SOCKS (8cm x 1.2m) | 20 socks | |
| c | 1330 | GENERAL PURPOSE ROLLS (46m) | Each |
| 1331 | OIL ONLY ROLLS (46m) | Each | |
| 1332 | CHEMICAL ROLLS (46m) | Each |